Redshift Project Depot

FRC 2018 (Power Up) => Robot Hardware => Topic started by: Ed B on January 24, 2018, 11:50:10 AM

Title: Useful mechanical information
Post by: Ed B on January 24, 2018, 11:50:10 AM
(http://www.edburdick.net/Picturelib/misc_images/ansi35RollerChainSpecs.png)
Title: Re: Useful mechanical information
Post by: Ed B on January 25, 2018, 11:49:08 PM
Mounting method for a seat motor. Note that the shaft is supported on both ends by bearings and does not depend on the output bearing of the motor. The end of the shaft that sticks into the motor is milled to a one inch long 6mm square shape.

(http://www.edburdick.net/Picturelib/misc_images/seatMotorMounting.png)