Redshift Project Depot

FRC 2016 (Stronghold) => Robot Hardware => Topic started by: Megan K on February 14, 2016, 02:44:51 PM

Title: CAD
Post by: Megan K on February 14, 2016, 02:44:51 PM
CAD members are BEHIND. Not good.
Title: Re: CAD
Post by: Megan K on February 14, 2016, 02:45:35 PM
Today I took measurements for the Intake. Chassis has things updated, and the scissor lift will have to be assembled independently on the final robot assembly in order for it to move.
Title: Re: CAD
Post by: Megan K on February 16, 2016, 08:18:49 PM
CAD team has made good progress. Scissor lift and shooter are mounted, thanks to Peter. The dropbox is also more organized.
Title: Re: CAD
Post by: Megan K on February 23, 2016, 11:20:05 PM
New task- to compile the files to make them more accessible to others using the method Ed was suggesting.
Title: Re: CAD
Post by: Louis L on February 24, 2016, 09:47:48 AM
Goal - we're looking at what to put up on Arcadia. One thing that would be nice to have is the entire robot in CAD. There are some other restrictions - such as running a real laptop instead of the r-Pi - but that's a separate issue. So please try and finish the model. It would really cool to have it on display in the pit.
Title: Re: CAD
Post by: Megan K on February 25, 2016, 08:35:57 PM
The model has been "Pack(ed) and (is) Go(ne)!"
Title: Re: CAD
Post by: Megan K on March 03, 2016, 08:36:58 PM
We are in the progress of animating the robot, to be viewed on Arcadia.