Author Topic: Intake/Storage/Serializer  (Read 1636 times)

Zach G

  • Guest
Intake/Storage/Serializer
« on: January 14, 2017, 03:39:35 PM »
1/13/2017
Log 1
By Swag

Within the first week we have built a proof of concept of the intake and storage. We started the serialized belt after storage concept, did't get very far, but the basic concept is there.

Zach G

  • Guest
Re: Intake/Storage/Serializer
« Reply #1 on: January 14, 2017, 03:51:58 PM »
1/14/2017
Log 2
By Swag

We started a basic cad model and waiting for an actual Cad person to help us
We have picked the two part  intake to serial system by adding a duel roller system
We picked the  PG27 Planetary Gearbox with 9015 Motor (am-2542) as the power
2-1 pulley system to speed up the intake
Waiting on restraints on storage size
Looking at belt and pulley sizes

Nilay M

  • Guest
Re: Intake/Storage/Serializer
« Reply #2 on: January 14, 2017, 05:14:29 PM »
To power the intake we will use a pulley and belt system. Where the intake is spinning twice as fast as the motor. The smallest pulley has 15 teeth and a diameter of 1.188" the link to the gear is here https://www.mcmaster.com/#1277N45. The second pulley has 30 teeth and a diameter of 2.125" the link is here https://www.mcmaster.com/#1277n54/=15wuuji. The belt that will be attached to these pulleys is 28 inches long the link is here https://www.mcmaster.com/#6484k237/=15wuwor. The distance between the two pulleys will be 12 inches.

Zach G

  • Guest
Re: Intake/Storage/Serializer
« Reply #3 on: January 15, 2017, 01:31:28 PM »
Simple cad of intake
« Last Edit: January 15, 2017, 01:33:49 PM by Zach G »

Zach G

  • Guest
Re: Intake/Storage/Serializer
« Reply #4 on: January 15, 2017, 01:34:24 PM »
Motor used for intake

Zach G

  • Guest
Re: Intake/Storage/Serializer
« Reply #5 on: January 15, 2017, 03:40:01 PM »
more Cad

Zach G

  • Guest
Re: Intake/Storage/Serializer
« Reply #6 on: January 15, 2017, 03:43:52 PM »
More cad

Zach G

  • Guest
Re: Intake/Storage/Serializer
« Reply #7 on: January 20, 2017, 08:30:00 PM »
Star date 1-20-2017
Ensign's log 6
Swag

Updated CAD Model
almost ready to build


Crew is restless and work is barely getting done.
The only way I can keep calm is listen to music while I work, but its barely working.
Will we finish?