• Welcome to Redshift Project Depot.
 

Intake/Storage/Serializer

Started by Zach G, January 14, 2017, 03:39:35 PM

Previous topic - Next topic

Zach G

1/13/2017
Log 1
By Swag

Within the first week we have built a proof of concept of the intake and storage. We started the serialized belt after storage concept, did't get very far, but the basic concept is there.

Zach G

1/14/2017
Log 2
By Swag

We started a basic cad model and waiting for an actual Cad person to help us
We have picked the two part  intake to serial system by adding a duel roller system
We picked the  PG27 Planetary Gearbox with 9015 Motor (am-2542) as the power
2-1 pulley system to speed up the intake
Waiting on restraints on storage size
Looking at belt and pulley sizes

Nilay M

To power the intake we will use a pulley and belt system. Where the intake is spinning twice as fast as the motor. The smallest pulley has 15 teeth and a diameter of 1.188" the link to the gear is here https://www.mcmaster.com/#1277N45. The second pulley has 30 teeth and a diameter of 2.125" the link is here https://www.mcmaster.com/#1277n54/=15wuuji. The belt that will be attached to these pulleys is 28 inches long the link is here https://www.mcmaster.com/#6484k237/=15wuwor. The distance between the two pulleys will be 12 inches.

Zach G

#3
Simple cad of intake

Zach G




Zach G

Star date 1-20-2017
Ensign's log 6
Swag

Updated CAD Model
almost ready to build


Crew is restless and work is barely getting done.
The only way I can keep calm is listen to music while I work, but its barely working.
Will we finish?