Author Topic: Chassis  (Read 17371 times)

Zach G

  • Guest
Re: Chassis
« Reply #15 on: January 30, 2016, 09:35:30 AM »
1/29/16

Wonjae set up the first half of the chassis and we are trying to get the correct length for the churros.
the chassis is theoretically we just  need to put it together and fix Andymarks mistakes

Eric A

  • Guest
Re: Chassis
« Reply #16 on: January 30, 2016, 02:56:34 PM »
1/30/16

We cut the remaining three churros and put one half together to see if everything was evenly spaced and if we needed to change the spacers at all. It looked like we would need to correct some issues regarding the width of the spacers on all three axles.

Zach G

  • Guest
Re: Chassis
« Reply #17 on: January 31, 2016, 12:57:06 PM »
1/31/15

Basic frame Chassis parts are in and we have completed the chassis. We may need to change a few things in future.

Then shalt thou count to three, no moreľno less. Three shall be the number thou shalt count, and the number of the counting shall be three. Four shalt thou not count, neither count thou two, excepting that thou then proceed to three. Five is right out

Aidan A

  • Guest
Re: Chassis
« Reply #18 on: January 31, 2016, 01:53:52 PM »
Today we finished the main chassis. We just have to do some fine tuning.

Megan K

  • Guest
Re: Chassis
« Reply #19 on: February 03, 2016, 08:52:38 PM »
CAD is currently assembling the Chassis. The wedge is already in.

Zach G

  • Guest
Re: Chassis
« Reply #20 on: February 04, 2016, 04:04:57 PM »
1/3/16
Started to attach the Wedge peice

Zach G

  • Guest
Re: Chassis
« Reply #21 on: February 04, 2016, 06:58:06 PM »
1/4/16

Finished wedge

YAAAAAAAAAAAAAAAAAAAAAAAA 8) :( :P :-X :-* :'( :-\ :) ;) >:( ;D :o

Zach G

  • Guest
Re: Chassis
« Reply #22 on: February 13, 2016, 10:41:42 AM »
2/11/16--15/16?

Building bumpers. Finding a way to attach bumpers to chassis

Megan K

  • Guest
Re: Chassis
« Reply #23 on: February 16, 2016, 08:18:06 PM »
The shooter and scissor lift are mounted on the chassis, and they move!!!! Now for intake...

Zach G

  • Guest
Re: Chassis
« Reply #24 on: February 21, 2016, 09:20:07 AM »
2/18/16-2/23/16
Bumpers are done, painted, and attached

Megan K

  • Guest
Re: Chassis
« Reply #25 on: February 22, 2016, 08:45:18 PM »
CAD's next task is to animate the robot. It will take a while, considering how much time is takes to edit the assembly.