Author Topic: Consider how limit switch wires get attached  (Read 425 times)

Louis L

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
Consider how limit switch wires get attached
« on: February 20, 2018, 11:38:03 PM »
A limit switch is no good if we can't attach wires to it. Make sure there is room for a wire and crimped-on connector. And there needs to be room to install and remove that connector.

Most limit switches use narrow connectors which are more difficult to get than the standard too-wide connectors. Using the correct size is important for fit and securely holding it in place.