Author Topic: Shooter  (Read 13280 times)

Ryan L

  • Guest
Re: Shooter
« Reply #15 on: February 17, 2016, 11:15:01 PM »
The shooter is mounted on the real chassis!


Most things are done, there are a couple things left to do
Done:
-pulling mechanism
-arms
-mounting
-hardstops
WIP
-pulling motor mounting
-limit switch
-replacing hardstop material to new material (we aquired new material end of yesterday)
Not done:
-anything we have yet to do that has not been talked about...

Update:
It works well, can shoot between 8ft away (from the front of the robot, and most likely 7 ft (not tested), all the way to the back of the courtyard, which is 16 feet to the back of the robot.


Louis L

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
Re: Shooter
« Reply #16 on: February 24, 2016, 10:05:49 AM »
We should consider re-plumbing the 2 springs that are bending over others as the current configuration shortens their useful life. The impact is one of time.

Ryan L

  • Guest
Re: Shooter
« Reply #17 on: March 02, 2016, 12:55:08 AM »
Apparently i never replied to this (i thought i did.. huh..)

Just fyi

Shooter's done


Yay!
(also duh, bag and tag was a week ago, but thats besides the point)

Louis L

  • Administrator
  • Hero Member
  • *****
  • Posts: 564
Re: Shooter
« Reply #18 on: March 02, 2016, 01:37:32 PM »
Apparently his cell phone is not the only thing that's slow to respond   :P

Apparently i never replied to this (i thought i did.. huh..)

Just fyi

Shooter's done


Yay!
(also duh, bag and tag was a week ago, but thats besides the point)