Author Topic: Labview - using quad encoder  (Read 1234 times)

Louis L

  • Administrator
  • Hero Member
  • *****
  • Posts: 565
Labview - using quad encoder
« on: August 16, 2016, 09:58:05 PM »
When using a quad encoder in Labview, don't read too quickly. A 10ms read loop is too fast and the hardware can't respond which causes problems with the device. A 25ms loop worked. Not sure where the threshold lies (between 10 and 25ms)
« Last Edit: May 03, 2017, 04:52:18 PM by Louis L »